Datasheet4U Logo Datasheet4U.com

MAX11200 - Delta- Sigma ADCs

Description

The MAX11200/MAX11210 are ultra-low-power (< 300FA active current), high-resolution, serial output ADCs.

Features

  • S 24.0-Bit ENOB at 5sps 20.9-Bit Noise-Free Resolution at 10sps 19-Bit Noise-Free Resolution at 120sps S 570nVRMS Noise at 10sps, Q3.6VFS Input S 1ppm INL (typ), 10ppm (max) S No Missing Codes S Ultra-Low Power Dissipation Operating-Mode Current Drain < 300µA (max) Sleep-Mode Current Drain < 0.4µA S Programmable Gain (1, 2, 4, 8, or 16) (MAX11210) S Four SPI-Controlled GPIOs for External Mux Control S 2.7V to 3.6V Analog Supply Voltage Range S 1.7V to 3.6V Digital and I/O Supply Voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1122 170Msps Analog-to-Digital Converter Maxim
MAX1125 8-Bit / 300Msps Flash ADC Maxim
MAX11253 Delta-Sigma ADC Maxim
MAX11254 Delta-Sigma ADC Maxim Integrated
MAX11259 Delta-Sigma ADC Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX11201 Delta- Sigma ADC
MAX11202 Delta- Sigma ADC
MAX11203 Delta- Sigma ADCs
MAX11205 Delta- Sigma ADC with 2-Wire Serial Interface
MAX11206 (MAX11206 / MAX11207) Delta-Sigma ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-5332; Rev 0; 6/10 24-Bit, Single-Channel, Ultra-Low-Power, Delta-Sigma ADCs with GPIO General Description The MAX11200/MAX11210 are ultra-low-power (< 300FA active current), high-resolution, serial output ADCs. These devices provide the highest resolution per unit power in the industry, and are optimized for applications that require very high dynamic range with low power, such as sensors on a 4mA to 20mA industrial control loop. Optional input buffers provide isolation of the signal inputs from the switched capacitor sampling network allowing these converters to be used with high-impedance sources without compromising available dynamic range or linearity. The devices provide a high-accuracy internal oscillator that requires no external components.
Published: |